Fine wire Drawing Machine --- Pan-Pioneer

Ą@

This range of size copper wire are most widely used for electronic wire, building wire, and enameled wire in the market nowadays.

The most important part to evaluate the quality of the fine wire drawing machine is the quality of the wire it producing ,for enameling wire especially.
There are two types of fine wire drawing machine, one is without annealing machine annealer and another is equipped with a continuous annealing. There are also two types of drawing dies

This is our latest design for fine wire drawing machine with patented annealing machine annealer machine technology which use PWM (pulse width modulation) technology to control the annealing machine annealer output with a high frequency wave control.

1. C-22 fine wire drawing machine c/w Ultra High frequency Continuous Annealing Machine

1.] fine wire drawing machine Main specification:

1.1.) Type: fine wire drawing machine Copper conductor wet drawing.

1.2.) fine wire drawing machine Supply wire: copper wire 1.2-0.5mm

1.3.) fine wire drawing machine Finished wire: 0.05-0.36 mm

1.4.) fine wire drawing machine Line speed: 40 MPM Max (at 0.127 for example).

1.5.) Number of dirs: 22 pcs

1.6.) Spooler: 305 mm. DIN spec

1.7.)fine wire drawing machine Driving motor:

1.7.1.) fine wire drawing machine AC motor with encoder feedback for drawing

1.7.2.) fine wire drawing machine AC motor with encoder feedback for take-up.

1.8.) annealing machine annealer capacity: High frequency 45KVA (Patented) transformer system.

1.9.) Continuous annealer:

1.9.1.) Ultra High Frequency True RMS power control system with PWM control mode. (patented)

1.9.2.) 350L cooling tank with pump for circulation with optional heat exchanger

1.9.3.) fine wire drawing machine Ball type valves for easy operation

1.9.5.) 2 contact sheaves compact type.

1.9.6.) 2 ultra high flow air wipers ( patented )

STRANDING MACHINE

WIRE DRAWING MACHINE

FINE WIRE DRAWING MACHINE PAGE-1

FINE WIRE DRAWING MACHINE PAGE-2

ROD BREAKDOWN MACHINE PAGE-1

DIE SEQUENCE PAGE-1

MEDIUM WIRE DRAWING MACHINE PAGE-1

MEDIUM WIRE DRAWING MACHINE PAGE-2

EXTRUSION MACHINE PAGE

EXTRUSION MACHINE PAGE-1

CABLE MACHINE

2.] fine wire drawing machine composition:

2.1.) Payoff / Takeup :

2.1.1.) Flyer type pay off device..................................................... 1set

2.1.2.) Tension type position arm with sensor............................. 1set

2.1.3.) fine wire drawing machine Independent takeup unit..................................................... 1set

2.1.4.) fine wire drawing machine Adjustable takeup traverser............................................... 1set

2.1.5.) Movable tray for loading/unloading bobbins.................... 1set

2.1.6.) 5hp AC fine wire drawing machine vector type motor with Inverter for takeup........... 1set

2.1.7.) Swelling type takeup head up to 315mm bobbins.......... 1set

2.1.8.) fine wire drawing machine Fluorescent lamp................................................................. 1set

2.1.9.) Ultra high flow air wiper (for cooling purpose).................. 1set

2.1.10.) Inching pad........................................................................ 1set

2.1.11.) Loading/Unloading bobbin device.................................. 1set

2.2.) Wire Drawing machine:

2.2.1.) Wire drawing Mainframe............................................................ 1set

2.2.2.) Corn type drawing capstan.............................................. 4sets

2.2.3.) Wiring drawing dies holder.......................................................... 2sets

2.2.4.) Lubricant spray.................................................................. 4sets

2.2.5.) 15hp AC vector type motor with Inverter............................. 1et

2.2.6.) 4 segment alarm indicator................................................. 1set

2.2.7.) fine wire drawing machine Fluorescent lamp................................................................. 1set

2.2.8.) fine wire drawing machine Lubricant tank with pump.................................................... 1set

2.2.9.) fine wire drawing machine Heat exchanger for drawing lubricant............................... 1set

2.2.10.) Heat exchanger for drawing lubricant............................. 1set

2.2.11.) Thermal Couple with temperature controller for drawing
lubricant............................................... 1set

2.2.12.) Drawing control panel....................... 1set

2.2.13.) fine wire drawing machine Viewing windows... 1set

2.2.14.) Inching pad............. 1set

2.3.) annealing machine annealer system:

2.3.1.) annealing machine annealer Mainframe........................... 1set

2.3.2.) nickel alloy contact sheave............................................... 4sets

2.3.3.) fine wire drawing machine Steam/Nitrogen/water
three way Oxygen isolator........... 1set

2.3.4.) Guide Roller.................................................................. some

2.3.5.) Ball type Water level controller......................................... 4sets

2.3.6.) Ball type Steam/Nitrogen water level controller............... 1set

2.3.7.) fine wire drawing machine Lubricant tank with Pump........ 1set

2.3.8.) Heat exchanger for annealing machine
annealer lubricant............ 1set(optional)

2.3.9.) Thermal couple with temperature controller..................... 1set

2.3.10.) fine wire drawing machine Ultra
high flow air wiper.................................................. 3sets

2.3.11.) Ultra high frequency annealing machine
annealer power controller............ 1set

2.3.12.) annealing machine annealer control Panel............ 1set

2.3.13.) Locking door......................................................... 1set

2.3.14.) fine wire drawing machine Inching pad.......................... 1set

3.] Standard spare parts

3.1.) fine wire drawing machine Sensor for counter.................... 1pcs

3.2.) Wire guide pulley for traverser ........................ 2pcs

3.3.) fine wire drawing machine Tools for bobbin
loading/un-loading ......................................... 1sets

3.4.) fine wire drawing machine Driven belt...................................... 1pcs

3.5.) fine wire drawing machine brake pad............................. 1pcs

3.6.) fine wire drawing machine Contact Sheave.......................... 2pcs

3.7.) bakelite roller.................................. 1pcs

3.8.) fine wire drawing machine Tool box..................................... 1set